Home / Automatic Doors / Omlet Autodoor Settings Aren’t Saving? Check Power Mode and Sync Timing
Omlet Autodoor Settings Aren’t Saving? Check Power Mode and Sync Timing
Omlet Smart Autodoor settings can look as if they are not saving when the panel is actually waiting for its next network check. Battery-powered units behave differently depending on the selected power mode.
Quick answer
Update firmware first. If saving from the physical panel, make sure you complete the save action. In the app, remember that Notification Only mode checks for settings only twice a day, while Notification + Control checks roughly every 10 minutes. Mains-powered units respond much faster.
1. Update firmware
Make sure you are troubleshooting current Smart Autodoor behavior.
2. If you use the control panel, complete the save action
Do not leave the menu before the panel confirms the setting has been stored.
3. If you use the app, check power mode
On battery power, Omlet offers modes that trade responsiveness for battery life.
4. Notification Only can take much longer to sync
This mode checks for new settings only a small number of times per day, so an app change may not appear immediately.
5. Notification + Control checks more often
This mode checks for commands roughly every 10 minutes, which is more responsive but uses more battery.
6. Mains power is the fastest option
Omlet says adaptor-powered units can receive commands almost immediately.
7. Watch for actual power loss
If the control panel is turning off, the problem may be power rather than saving. Use our power-on troubleshooting guide.
Frequently asked questions
Why did my app setting not apply right away?
Battery-saving mode may delay how often the door checks for new settings.
Will mains power make settings sync faster?
Yes. Omlet says mains-powered Smart Autodoors can respond much more quickly.
Sources checked
We checked Omlet’s current “My Autodoor settings aren’t saving” article and battery-power-mode guidance.